Please use this identifier to cite or link to this item:
https://etd.cput.ac.za/handle/20.500.11838/1168
Title: | The development of a 100 KHZ switched-mode power supply | Authors: | Gärtner, Andy Michael | Keywords: | Electronic engineering | Issue Date: | 1991 | Publisher: | Cape Technikon | Abstract: | At the time of the design the maximum allowable operating frequency for an output power of between 200 and 250 watts was 100 kHz. Although a 600 kHz operating frequency could have been achieved, it would only be at a very low output power level. To maximise the current components available, a 210 watt 100 kHz direct-off-line switched-mode power supply was developed. The design presented can be used to power any compatible IBM XT/AT personal computer. The prototype was tested. An overall efficiency of 61% was achieved. The final prototype required 1 521 cm3 and weighed approximately 980 g, representing a power to volume ratio of 0.14 W/cm3 (2.26 W/inch3). Detailed procedures are also presented to help with the design and selection of the reactive components. Special design features include the half-bridge push-pull topology, MOSFETS as power switches, digital current limiting, primary power limiting, multiple outputs and fault counting to name but a few. | Description: | Thesis (Masters Diploma (Electricity Engineering) -- Cape Technikon, Cape Town,1991 | URI: | http://hdl.handle.net/20.500.11838/1168 |
Appears in Collections: | Electrical, Electronic and Computer Engineering - Master's Degree |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
The development of a 100KHZ switched - mode power supply.pdf | 3.32 MB | Adobe PDF | View/Open |
Page view(s)
1,740
Last Week
1,333
1,333
Last month
1,333
1,333
checked on Feb 16, 2022
Download(s)
2,166
checked on Feb 16, 2022
Google ScholarTM
Check
This item is licensed under a Creative Commons License