Ultrasonic measurement of membrane fouling during microfiltration of natural brown water

Abstract

The removal of the colour-eausing natural organic matter (NOM) from natural brown water (NSW) to be used for drinking purposes is of paramount importance. One of the methods available to remove NOM from NSW is the use of pressure-driven membrane separation systems. One of the limitations in efficiently applying membrane filtration in the treatment of NOM-eontaining water is membrane fouling that is caused by foulants, such as NOM, that accumulate on the membrane surface and in the membrane pores. Microfiltration (MF), as a membrane separation system, is susceptible to severe membrane fouling during membrane filtration of NSW. Fouling is characterized by a rapid decline in permeate flux and loss of productivity. Progress in developing more effective control and prevention of fouling is impeded by the absence of suitable fouling measurement and characterization techniques. An in situ method for measuring membrane fouling is necessary for detection of membrane fouling during MF of NSW at the eartiest stages so that the corrective actions can be taken before fouling is permanently adsorbed onto the membrane surface. In this study, an ultrasonic-based method was effectively used to detect and measure the growth of membrane fouling dUring MF of NSW, in situ. Fouling exp~riments results showed the formation of a new peak on the ultrasonic response echo signal due to the presence of a fouling layer on the surface of the membrane. The ultrasonic signals acquired during the in-situ detection of membrane fouling were analysed using wavelet transforms (WTs). Wavelet analysis was applied to differential signals to obtain additional information about fouling. Differential signals were calculated by subtracting the baseline measurement signals from the test signals. The presence of the fouling layer on membranes was verified by atomic force microscopy (AFM) and scanning electron microscopy (SEM) analyses of the fouled membranes.