Please use this identifier to cite or link to this item:
https://etd.cput.ac.za/handle/20.500.11838/914
Title: | Non-Newtonian loss coefficients for Saunders diaphragm valves | Authors: | Kabwe, Aime Mume | Keywords: | Non-Newtonian fluids.;Valves.;MTech;Theses, dissertations, etc. | Issue Date: | 2009 | Publisher: | Cape Peninsula University of Technology | Abstract: | The prediction of the energy losses when designing pipeline and pumping systems requires accurate loss coefficient data. But the loss coefficient data found in the open literature was not adequate for predicting the loss coefficient for Saunders straight-through diaphragm valves. As more accurate loss coefficient data to enable more efficient pipeline designs are scarce in the open literature, it is problematic to predict the head loss due to the pipeline fittings, and particularly for diaphragm valves. Most of the data given in the literature are for turbulent flow based on water. Due to water shortages mining operations are forced to increase their solids concentrations and to operate in laminar flow (Slatter, 2002). Consequently there is a need to determine loss coefficient data in laminar flow for valves used in these industries to ensure energy efficient designs (Pienaar et al., 2001; 2004) or if needed, to derive a new correlation to predict losses through Saunders diaphragm valves. However, a systematic study of various sizes of diaphragm valves of different manufacturers to ascertain, if the same loss coefficient can be applied, has never been done. Therefore a comparison will be made between the data produced in this work and the existing correlations. The objective of this research was to determine loss coefficient data in laminar, transitional and turbulent flow for the Saunders type straight-through diaphragm valves ranging from 40 mm to 100 mm in the fully open, 75 %, 50 % and 25 % open positions, using a range of Newtonian and non-Newtonian fluids. The test work was conducted on the valve test rig in the Flow Process Research Centre at the Cape Peninsula University of Technology. This work investigated only Newtonian and time independent homogeneous non-Newtonian fluids or slurries flowing through Saunders straight-through diaphragm valves in the turbulent, transitional and laminar regimes. Weir-type Saunders valves and time-dependent fluid behaviour were not investigated in this study. Preamble Non-Newtonian Loss Coefficients for Saunders Diaphragm Valves A Mume Kabwe The results for each test are presented in the form of valve loss coefficient (kvalve) against Reynolds number (Re). This thesis adds new loss coefficient data to the open literature, and a new correlation, which will be useful for designing pipelines in industries, as well as contributing to the academic debate in this discipline. | Description: | Thesis (MTech (Chemical Engineering))--Cape Peninsula University of Technology, 2009 | URI: | http://hdl.handle.net/20.500.11838/914 |
Appears in Collections: | Chemical Engineering - Masters Degrees |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Kabwe_am_MTech_chem_eng_2009 | 27.94 MB | Adobe PDF | ![]() View/Open |
Page view(s)
1,050
Last Week
971
971
Last month
971
971
checked on Feb 16, 2022
Download(s)
149
checked on Feb 16, 2022
Google ScholarTM
Check
This item is licensed under a Creative Commons License